​

*** 4 points OCC Dial Liner With Rubber Coated Anti Slip Knob & EPP Foam Padding

*** Many Colors Available

*** 1.4kg (M/L) ;1.45kg (L/XL) ;1.56kg(XL/XXL)fully assembled

*** Size M/L (Fits 55-59cm headrim, US Size 7 1/4 - 7 5/8) and L/XL (Fits 58-61cm headrim, US Size 7 3/8 - 7 5/8) Size XL/XXL (Fits 61-64cm headrim, US Size 7 5/8 - 8)

If your head size is in the middle of two sizes, please go for the larger size

*** Test Report Below Shown Lowest BFD (Backface Deformation) Is 2mm And Highest is 10mm (USA Department of Defence Requires 5 Shots Test On 9mm, Front and Back MAX BFD Allowed Is Less Than 25mm, Both Sides And Crown MAX BFD Must Be Less Than 16mm--This Is So Far The Highest BFD Requirement In The USA FOR BALLISTIC HELMET PERFORMANCE )

*** This Helmet Also Passed Ballistic Impact Attenuation Test (Only Available In NIJ IIIA 0106.01 Compliance Tested Helmets)

*** Aramid Core (Imported Twaron) Shell Construction 

*** V50 Ballistic Limit Tested According To EU Stanag 2920 & USA MIL-STD-662F Standards, Results Tested Is Between 670m/s (2198 ft/s) to 700m/s (2290 ft/s), In Case You Are Interested In Customize Your Helmet With Higher V50, We Are Able To Achieve Up To 750m/s -- 2460 ft/s  (Military Contract Orders Only With MOQ Apply)

*** You Are Buying Directly From Manufacturer's Brand--We Make 40,000+ Helmets Annually

*** Since 25th August 2017, We Became The First Manufacturer In China, And One Of The Only Few In The World That Makes Full Cut, Mid Cut, High Cut and Super High Cut Ballistic Helmets

** This model complies with NIJ Standard-0106.01 for Ballistic Helmets.**

** This model complies with US DOT&E’s BFD protocol (9mm BFD/BFS Test)**

ICW (In Conjunction With) III+ Plaque Features:

*** Polyurea Coated Matt Finishing

​

*** Black Or Oliver Drab Color

*** One Size Weighted Approx 900g

*** Fits MILITECH's FAST High Cut Ballistic Helmet Size M/L, L/XL, And Size XL/XXL 

Other Features:

*** Slot Enabled Side Rails For Cable Routing

*** New Aluminum NVG Mount

*** New Sticky Loops Pattern

*** New Rubber Coated Size Adjustable Knob

*** Slide Lock Buckle Liner System--At Least 2 Times More Stable Than Our Previous Dial Liner System*

*** New Nylon Mil-Spec Webbing Suited To Helmet Color (Only Available For Solid Colored Helmets)

*** Metal Clot Bungee End

*** Same Good Quality Shell--Fully NIJ IIIA 0106.01 Compliant And US D.O.D 9mm Trauma Protocol Compliant, It's Identical You Can Recognize Our Trauma Is Less Than Most Of Our Competitors' Products In China, Yet We Are Lighter**

* Testings were done based on webbing break up strength and stabilizing calculation

** Testings performed under same test conditions and ballistic standards

IF YOU NEED HELP TO MAKE A DECISION OR YOU HAPPEN TO HAVE ANY QUESTION, PLEASE FEEL FREE TO CONTACT US HERE

2 IN 1 HELMET OFFICIAL TESTING VIDEO BY OBL, USA

3 IN 1 HELMET OFFICIAL TESTING VIDEO BY OBL, USA

2 IN 1 HELMET OFFICIAL TESTING VIDEO BY BUFFMAN RANGE, USA

2 IN 1 HELMET OFFICIAL TESTING VIDEO BY OLYMPUS LOGISTICS PH, PHILIPPINES